1
0
mirror of https://git.zx2c4.com/wireguard-go synced 2024-11-15 01:05:15 +01:00
wireguard-go/device/send.go
Jordan Whited 6a84778f2c conn, device: use UDP GSO and GRO on Linux
StdNetBind probes for UDP GSO and GRO support at runtime. UDP GSO is
dependent on checksum offload support on the egress netdev. UDP GSO
will be disabled in the event sendmmsg() returns EIO, which is a strong
signal that the egress netdev does not support checksum offload.

The iperf3 results below demonstrate the effect of this commit between
two Linux computers with i5-12400 CPUs. There is roughly ~13us of round
trip latency between them.

The first result is from commit 052af4a without UDP GSO or GRO.

Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-10.00  sec  9.85 GBytes  8.46 Gbits/sec  1139   3.01 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  9.85 GBytes  8.46 Gbits/sec  1139  sender
[  5]   0.00-10.04  sec  9.85 GBytes  8.42 Gbits/sec        receiver

The second result is with UDP GSO and GRO.

Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-10.00  sec  12.3 GBytes  10.6 Gbits/sec  232   3.15 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  12.3 GBytes  10.6 Gbits/sec  232   sender
[  5]   0.00-10.04  sec  12.3 GBytes  10.6 Gbits/sec        receiver

Reviewed-by: Adrian Dewhurst <adrian@tailscale.com>
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2023-10-10 15:07:36 +02:00

544 lines
14 KiB
Go

/* SPDX-License-Identifier: MIT
*
* Copyright (C) 2017-2023 WireGuard LLC. All Rights Reserved.
*/
package device
import (
"bytes"
"encoding/binary"
"errors"
"net"
"os"
"sync"
"time"
"golang.org/x/crypto/chacha20poly1305"
"golang.org/x/net/ipv4"
"golang.org/x/net/ipv6"
"golang.zx2c4.com/wireguard/conn"
"golang.zx2c4.com/wireguard/tun"
)
/* Outbound flow
*
* 1. TUN queue
* 2. Routing (sequential)
* 3. Nonce assignment (sequential)
* 4. Encryption (parallel)
* 5. Transmission (sequential)
*
* The functions in this file occur (roughly) in the order in
* which the packets are processed.
*
* Locking, Producers and Consumers
*
* The order of packets (per peer) must be maintained,
* but encryption of packets happen out-of-order:
*
* The sequential consumers will attempt to take the lock,
* workers release lock when they have completed work (encryption) on the packet.
*
* If the element is inserted into the "encryption queue",
* the content is preceded by enough "junk" to contain the transport header
* (to allow the construction of transport messages in-place)
*/
type QueueOutboundElement struct {
sync.Mutex
buffer *[MaxMessageSize]byte // slice holding the packet data
packet []byte // slice of "buffer" (always!)
nonce uint64 // nonce for encryption
keypair *Keypair // keypair for encryption
peer *Peer // related peer
}
func (device *Device) NewOutboundElement() *QueueOutboundElement {
elem := device.GetOutboundElement()
elem.buffer = device.GetMessageBuffer()
elem.Mutex = sync.Mutex{}
elem.nonce = 0
// keypair and peer were cleared (if necessary) by clearPointers.
return elem
}
// clearPointers clears elem fields that contain pointers.
// This makes the garbage collector's life easier and
// avoids accidentally keeping other objects around unnecessarily.
// It also reduces the possible collateral damage from use-after-free bugs.
func (elem *QueueOutboundElement) clearPointers() {
elem.buffer = nil
elem.packet = nil
elem.keypair = nil
elem.peer = nil
}
/* Queues a keepalive if no packets are queued for peer
*/
func (peer *Peer) SendKeepalive() {
if len(peer.queue.staged) == 0 && peer.isRunning.Load() {
elem := peer.device.NewOutboundElement()
elems := peer.device.GetOutboundElementsSlice()
*elems = append(*elems, elem)
select {
case peer.queue.staged <- elems:
peer.device.log.Verbosef("%v - Sending keepalive packet", peer)
default:
peer.device.PutMessageBuffer(elem.buffer)
peer.device.PutOutboundElement(elem)
peer.device.PutOutboundElementsSlice(elems)
}
}
peer.SendStagedPackets()
}
func (peer *Peer) SendHandshakeInitiation(isRetry bool) error {
if !isRetry {
peer.timers.handshakeAttempts.Store(0)
}
peer.handshake.mutex.RLock()
if time.Since(peer.handshake.lastSentHandshake) < RekeyTimeout {
peer.handshake.mutex.RUnlock()
return nil
}
peer.handshake.mutex.RUnlock()
peer.handshake.mutex.Lock()
if time.Since(peer.handshake.lastSentHandshake) < RekeyTimeout {
peer.handshake.mutex.Unlock()
return nil
}
peer.handshake.lastSentHandshake = time.Now()
peer.handshake.mutex.Unlock()
peer.device.log.Verbosef("%v - Sending handshake initiation", peer)
msg, err := peer.device.CreateMessageInitiation(peer)
if err != nil {
peer.device.log.Errorf("%v - Failed to create initiation message: %v", peer, err)
return err
}
var buf [MessageInitiationSize]byte
writer := bytes.NewBuffer(buf[:0])
binary.Write(writer, binary.LittleEndian, msg)
packet := writer.Bytes()
peer.cookieGenerator.AddMacs(packet)
peer.timersAnyAuthenticatedPacketTraversal()
peer.timersAnyAuthenticatedPacketSent()
err = peer.SendBuffers([][]byte{packet})
if err != nil {
peer.device.log.Errorf("%v - Failed to send handshake initiation: %v", peer, err)
}
peer.timersHandshakeInitiated()
return err
}
func (peer *Peer) SendHandshakeResponse() error {
peer.handshake.mutex.Lock()
peer.handshake.lastSentHandshake = time.Now()
peer.handshake.mutex.Unlock()
peer.device.log.Verbosef("%v - Sending handshake response", peer)
response, err := peer.device.CreateMessageResponse(peer)
if err != nil {
peer.device.log.Errorf("%v - Failed to create response message: %v", peer, err)
return err
}
var buf [MessageResponseSize]byte
writer := bytes.NewBuffer(buf[:0])
binary.Write(writer, binary.LittleEndian, response)
packet := writer.Bytes()
peer.cookieGenerator.AddMacs(packet)
err = peer.BeginSymmetricSession()
if err != nil {
peer.device.log.Errorf("%v - Failed to derive keypair: %v", peer, err)
return err
}
peer.timersSessionDerived()
peer.timersAnyAuthenticatedPacketTraversal()
peer.timersAnyAuthenticatedPacketSent()
// TODO: allocation could be avoided
err = peer.SendBuffers([][]byte{packet})
if err != nil {
peer.device.log.Errorf("%v - Failed to send handshake response: %v", peer, err)
}
return err
}
func (device *Device) SendHandshakeCookie(initiatingElem *QueueHandshakeElement) error {
device.log.Verbosef("Sending cookie response for denied handshake message for %v", initiatingElem.endpoint.DstToString())
sender := binary.LittleEndian.Uint32(initiatingElem.packet[4:8])
reply, err := device.cookieChecker.CreateReply(initiatingElem.packet, sender, initiatingElem.endpoint.DstToBytes())
if err != nil {
device.log.Errorf("Failed to create cookie reply: %v", err)
return err
}
var buf [MessageCookieReplySize]byte
writer := bytes.NewBuffer(buf[:0])
binary.Write(writer, binary.LittleEndian, reply)
// TODO: allocation could be avoided
device.net.bind.Send([][]byte{writer.Bytes()}, initiatingElem.endpoint)
return nil
}
func (peer *Peer) keepKeyFreshSending() {
keypair := peer.keypairs.Current()
if keypair == nil {
return
}
nonce := keypair.sendNonce.Load()
if nonce > RekeyAfterMessages || (keypair.isInitiator && time.Since(keypair.created) > RekeyAfterTime) {
peer.SendHandshakeInitiation(false)
}
}
func (device *Device) RoutineReadFromTUN() {
defer func() {
device.log.Verbosef("Routine: TUN reader - stopped")
device.state.stopping.Done()
device.queue.encryption.wg.Done()
}()
device.log.Verbosef("Routine: TUN reader - started")
var (
batchSize = device.BatchSize()
readErr error
elems = make([]*QueueOutboundElement, batchSize)
bufs = make([][]byte, batchSize)
elemsByPeer = make(map[*Peer]*[]*QueueOutboundElement, batchSize)
count = 0
sizes = make([]int, batchSize)
offset = MessageTransportHeaderSize
)
for i := range elems {
elems[i] = device.NewOutboundElement()
bufs[i] = elems[i].buffer[:]
}
defer func() {
for _, elem := range elems {
if elem != nil {
device.PutMessageBuffer(elem.buffer)
device.PutOutboundElement(elem)
}
}
}()
for {
// read packets
count, readErr = device.tun.device.Read(bufs, sizes, offset)
for i := 0; i < count; i++ {
if sizes[i] < 1 {
continue
}
elem := elems[i]
elem.packet = bufs[i][offset : offset+sizes[i]]
// lookup peer
var peer *Peer
switch elem.packet[0] >> 4 {
case 4:
if len(elem.packet) < ipv4.HeaderLen {
continue
}
dst := elem.packet[IPv4offsetDst : IPv4offsetDst+net.IPv4len]
peer = device.allowedips.Lookup(dst)
case 6:
if len(elem.packet) < ipv6.HeaderLen {
continue
}
dst := elem.packet[IPv6offsetDst : IPv6offsetDst+net.IPv6len]
peer = device.allowedips.Lookup(dst)
default:
device.log.Verbosef("Received packet with unknown IP version")
}
if peer == nil {
continue
}
elemsForPeer, ok := elemsByPeer[peer]
if !ok {
elemsForPeer = device.GetOutboundElementsSlice()
elemsByPeer[peer] = elemsForPeer
}
*elemsForPeer = append(*elemsForPeer, elem)
elems[i] = device.NewOutboundElement()
bufs[i] = elems[i].buffer[:]
}
for peer, elemsForPeer := range elemsByPeer {
if peer.isRunning.Load() {
peer.StagePackets(elemsForPeer)
peer.SendStagedPackets()
} else {
for _, elem := range *elemsForPeer {
device.PutMessageBuffer(elem.buffer)
device.PutOutboundElement(elem)
}
device.PutOutboundElementsSlice(elemsForPeer)
}
delete(elemsByPeer, peer)
}
if readErr != nil {
if errors.Is(readErr, tun.ErrTooManySegments) {
// TODO: record stat for this
// This will happen if MSS is surprisingly small (< 576)
// coincident with reasonably high throughput.
device.log.Verbosef("Dropped some packets from multi-segment read: %v", readErr)
continue
}
if !device.isClosed() {
if !errors.Is(readErr, os.ErrClosed) {
device.log.Errorf("Failed to read packet from TUN device: %v", readErr)
}
go device.Close()
}
return
}
}
}
func (peer *Peer) StagePackets(elems *[]*QueueOutboundElement) {
for {
select {
case peer.queue.staged <- elems:
return
default:
}
select {
case tooOld := <-peer.queue.staged:
for _, elem := range *tooOld {
peer.device.PutMessageBuffer(elem.buffer)
peer.device.PutOutboundElement(elem)
}
peer.device.PutOutboundElementsSlice(tooOld)
default:
}
}
}
func (peer *Peer) SendStagedPackets() {
top:
if len(peer.queue.staged) == 0 || !peer.device.isUp() {
return
}
keypair := peer.keypairs.Current()
if keypair == nil || keypair.sendNonce.Load() >= RejectAfterMessages || time.Since(keypair.created) >= RejectAfterTime {
peer.SendHandshakeInitiation(false)
return
}
for {
var elemsOOO *[]*QueueOutboundElement
select {
case elems := <-peer.queue.staged:
i := 0
for _, elem := range *elems {
elem.peer = peer
elem.nonce = keypair.sendNonce.Add(1) - 1
if elem.nonce >= RejectAfterMessages {
keypair.sendNonce.Store(RejectAfterMessages)
if elemsOOO == nil {
elemsOOO = peer.device.GetOutboundElementsSlice()
}
*elemsOOO = append(*elemsOOO, elem)
continue
} else {
(*elems)[i] = elem
i++
}
elem.keypair = keypair
elem.Lock()
}
*elems = (*elems)[:i]
if elemsOOO != nil {
peer.StagePackets(elemsOOO) // XXX: Out of order, but we can't front-load go chans
}
if len(*elems) == 0 {
peer.device.PutOutboundElementsSlice(elems)
goto top
}
// add to parallel and sequential queue
if peer.isRunning.Load() {
peer.queue.outbound.c <- elems
for _, elem := range *elems {
peer.device.queue.encryption.c <- elem
}
} else {
for _, elem := range *elems {
peer.device.PutMessageBuffer(elem.buffer)
peer.device.PutOutboundElement(elem)
}
peer.device.PutOutboundElementsSlice(elems)
}
if elemsOOO != nil {
goto top
}
default:
return
}
}
}
func (peer *Peer) FlushStagedPackets() {
for {
select {
case elems := <-peer.queue.staged:
for _, elem := range *elems {
peer.device.PutMessageBuffer(elem.buffer)
peer.device.PutOutboundElement(elem)
}
peer.device.PutOutboundElementsSlice(elems)
default:
return
}
}
}
func calculatePaddingSize(packetSize, mtu int) int {
lastUnit := packetSize
if mtu == 0 {
return ((lastUnit + PaddingMultiple - 1) & ^(PaddingMultiple - 1)) - lastUnit
}
if lastUnit > mtu {
lastUnit %= mtu
}
paddedSize := ((lastUnit + PaddingMultiple - 1) & ^(PaddingMultiple - 1))
if paddedSize > mtu {
paddedSize = mtu
}
return paddedSize - lastUnit
}
/* Encrypts the elements in the queue
* and marks them for sequential consumption (by releasing the mutex)
*
* Obs. One instance per core
*/
func (device *Device) RoutineEncryption(id int) {
var paddingZeros [PaddingMultiple]byte
var nonce [chacha20poly1305.NonceSize]byte
defer device.log.Verbosef("Routine: encryption worker %d - stopped", id)
device.log.Verbosef("Routine: encryption worker %d - started", id)
for elem := range device.queue.encryption.c {
// populate header fields
header := elem.buffer[:MessageTransportHeaderSize]
fieldType := header[0:4]
fieldReceiver := header[4:8]
fieldNonce := header[8:16]
binary.LittleEndian.PutUint32(fieldType, MessageTransportType)
binary.LittleEndian.PutUint32(fieldReceiver, elem.keypair.remoteIndex)
binary.LittleEndian.PutUint64(fieldNonce, elem.nonce)
// pad content to multiple of 16
paddingSize := calculatePaddingSize(len(elem.packet), int(device.tun.mtu.Load()))
elem.packet = append(elem.packet, paddingZeros[:paddingSize]...)
// encrypt content and release to consumer
binary.LittleEndian.PutUint64(nonce[4:], elem.nonce)
elem.packet = elem.keypair.send.Seal(
header,
nonce[:],
elem.packet,
nil,
)
elem.Unlock()
}
}
func (peer *Peer) RoutineSequentialSender(maxBatchSize int) {
device := peer.device
defer func() {
defer device.log.Verbosef("%v - Routine: sequential sender - stopped", peer)
peer.stopping.Done()
}()
device.log.Verbosef("%v - Routine: sequential sender - started", peer)
bufs := make([][]byte, 0, maxBatchSize)
for elems := range peer.queue.outbound.c {
bufs = bufs[:0]
if elems == nil {
return
}
if !peer.isRunning.Load() {
// peer has been stopped; return re-usable elems to the shared pool.
// This is an optimization only. It is possible for the peer to be stopped
// immediately after this check, in which case, elem will get processed.
// The timers and SendBuffers code are resilient to a few stragglers.
// TODO: rework peer shutdown order to ensure
// that we never accidentally keep timers alive longer than necessary.
for _, elem := range *elems {
elem.Lock()
device.PutMessageBuffer(elem.buffer)
device.PutOutboundElement(elem)
}
continue
}
dataSent := false
for _, elem := range *elems {
elem.Lock()
if len(elem.packet) != MessageKeepaliveSize {
dataSent = true
}
bufs = append(bufs, elem.packet)
}
peer.timersAnyAuthenticatedPacketTraversal()
peer.timersAnyAuthenticatedPacketSent()
err := peer.SendBuffers(bufs)
if dataSent {
peer.timersDataSent()
}
for _, elem := range *elems {
device.PutMessageBuffer(elem.buffer)
device.PutOutboundElement(elem)
}
device.PutOutboundElementsSlice(elems)
if err != nil {
var errGSO conn.ErrUDPGSODisabled
if errors.As(err, &errGSO) {
device.log.Verbosef(err.Error())
err = errGSO.RetryErr
}
}
if err != nil {
device.log.Errorf("%v - Failed to send data packets: %v", peer, err)
continue
}
peer.keepKeyFreshSending()
}
}